Conductix-Wampfler launches CopperECO conductor rail series

CopperECO was developed in response to the challenge that equipment manufacturers and operators face: The transmission of high currents to the consumer while the mobile unit is not moving, i.e. at a standstill, as is the case with load handling devices in lifting operation without simultaneous longitudinal travel of the crane. 

Up to now, the only choice of conductive material was between premium copper with the best conductivity and aluminum-stainless steel variants, which are at lower cost but tend to heat up locally when at a standstill due to the material properties. In order to ensure the safe operation of the equipment even in critical applications, often complex multiple current collector combinations with high space requirements had to be installed. 

With CopperECO, Conductix-Wampfler offers an alternative between copper and aluminum-stainless steel. This rail type offers significantly improved conductivity compared to aluminum-stainless steel and allows the safe transmission of high currents even during standstill operation. 

CopperECO is also suitable for demanding outdoor environmental conditions, including seaports. 

CopperECO rail types are available for the Single PowerLine 0812 and 0813 conductor rail series and are particularly suitable for the reliable power supply to container and overhead cranes, AS/RS, cable propelled people movers or amusement rides. 

By Jenny Eagle